
Support
- Total activity 994
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 0
- Subscriptions 942
Articles
Recent activity by Support-
PCEG011 What backing Pad & Clamp Nut should I get?
An angle grinder, a side grinder, or a disc grinder, is a handheld power tool used for grinding (abrasive cutting) and polishing. For this model, you can use the Rubber Backing Pad: DW4945 or DABP...
-
126 Porter Cable planer parts and manual
When looking for parts or the manual of the 126 Porta-Planer through our ServiceNet website, you need to add "J-" before the 126 model number. Example: J-126 You can also click here to be redirec...
-
Do Porter Cable batteries have a lifetime?
The typical estimated life of a Lithium-Ion battery is about two to three years or300 to 500 charge cycles, whichever occurs first. One charge cycle is a periodof use from fully charged, to fully d...
-
How to compare Porter Cable tools?
In order to get a comparison among specific tools, please get in contact with our support team via phone at 888-848-5175. Also, you can email our support team at support.us@support-portercable.ze...
-
What kind of oil should I use to lubricate my pneumatic nailer or stapler?
The preferred lubricant is Porter-Cable accessory item # PTA1, however any good quality, 10 weight, non-detergent oil rated for use in pneumatic tools is acceptable.Most home centers and other deal...
-
What is the height of the 390K sander?
It is 4.5 inches tall.
-
What wrench do I use to adjust the clamping pressure of the PC890 Router?
Use a number T-27 Torx Wrench to adjust the lever clamping mechanism.
-
What is the maximum recommended thickness of metal that can be cut with the PC3012?
We recommend for cutting of sheet metal that is 18 gauge or less.
-
What is the distance from the bottom of the handles to the bottom of the sub-base?
The distance from bottom of handles to bottom of sub-base is .843" (27/32").
-
What should the pipe plug be torqued to?
Pipe Plug torque should be 35-40 inch lbs. Note: While Porter-Cable part number 859069 pipe plug is a standard pipe plug, you should only use the Porter-Cable part as part number 859069 pipe plug i...